In this article we have summarized the Peugeot Boxer dimensions for you. The basis for every interior design.


Peugeot Boxer Vehicle dimensions
Introduction
To give you the smoothest possible start to your individual interior project, we have compiled the dimensions of all available Peugeot Boxer models.
Disclaimer: VanMe is not responsible for the correctness and completeness of the content presented. All information without guarantee. After handing over the vehicle, we will professionally measure your interior with a laser so that we can take any deviations into account in the planning.
Peugeot Boxer year of construction 2006 to today

L1/H1 | L1/H2 | L2/H1 | L2/H2 | L4/H2 | L4/H3 | L5/H2 | L5/H3 | ||
A | Wheelbase (mm) | 3000 | 3000 | 3450 | 3450 | 4035 | 4035 | 4035 | 4035 |
B | Vehicle length (mm) | 4963 | 4963 | 5413 | 5413 | 5998 | 5998 | 6363 | 6363 |
C | Load compartment length (mm) | 2670 | 2670 | 3120 | 3120 | 3705 | 3705 | 4070 | 4070 |
D | Load compartment width (mm) | 1870 | 1870 | 1870 | 1870 | 1870 | 1870 | 1870 | 1870 |
E | Load compartment height (mm) | 1662 | 1932 | 1662 | 1932 | 1932 | 2168 | 1932 | 2168 |
F | Vehicle height (mm) | 2254 | 2522 | 2254 | 2522 | 2522 | 2760 | 2522 | 2760 |
G | Between wheel arches (mm) | 1422 | 1422 | 1422 | 1422 | 1422 | 1422 | 1422 | 1422 |
H | Length overhang (mm) | 1015 | 1015 | 1015 | 1015 | 1015 | 1015 | 1380 | 1380 |
Load volume (m3) | 8 | 9,5 | 10 | 11,5 | 13 | 15 | 15 | 17 | |
Roof load (kg) | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
The Peugeot Boxer dimensions in individual interior fittings
The Boxer is the absolute space miracle on the vehicle market and therefore offers maximum space for individual interior fittings.
The interior of the Boxer is practically square. The base area is rectangular and is barely cut into by the vehicle contour from floor to ceiling. This is made possible by very straight outer walls and a vehicle roof without a slope. The vehicle has a very short front end, making the ratio of overall length to load compartment length the largest on the market.
The Boxer is available in four different lengths and three different heights. Height 2 is the ideal basis for an individual interior conversion, as it offers standing height and still allows a roof with a sufficient roof load for roof racks or pop-up roofs.
For a pop-up roof, the Boxer must be at least length 2. A Boxer with a height of 3 is supplied with a GRP high roof. A GRP high roof offers maximum height but does not allow any installations on the roof apart from roof hatches as a GRP roof releases zero kilos of roof load.
Would you like to compare different vehicles? Click here for the article for the Mercedes Sprinter or the Fiat Ducato.


Fiat Ducato vehicle dimensions
In this article we have summarized the dimensions of the Fiat Ducato for you. The basis for every interior design.
Introduction
To give you the smoothest possible start to your individual interior project, we have compiled the dimensions of all available Fiat Ducato models.
Disclaimer: VanMe is not responsible for the correctness and completeness of the content presented. All information without guarantee. After handing over the vehicle, we will professionally measure your interior with a laser so that we can take any deviations into account in the planning.
Fiat Ducato year of construction 2006 to today

L1/H1 | L1/H2 | L2/H1 | L2/H2 | L4/H2 | L4/H3 | L5/H2 | L5/H3 | ||
A | Wheelbase (mm) | 3000 | 3000 | 3450 | 3450 | 4035 | 4035 | 4035 | 4035 |
B | Vehicle length (mm) | 4963 | 4963 | 5413 | 5413 | 5998 | 5998 | 6363 | 6363 |
C | Load compartment length (mm) | 2670 | 2670 | 3120 | 3120 | 3705 | 3705 | 4070 | 4070 |
D | Load compartment width (mm) | 1870 | 1870 | 1870 | 1870 | 1870 | 1870 | 1870 | 1870 |
E | Load compartment height (mm) | 1662 | 1932 | 1662 | 1932 | 1932 | 2168 | 1932 | 2168 |
F | Vehicle height (mm) | 2254 | 2522 | 2254 | 2522 | 2522 | 2760 | 2522 | 2760 |
G | Between wheel arches (mm) | 1422 | 1422 | 1422 | 1422 | 1422 | 1422 | 1422 | 1422 |
H | Length overhang (mm) | 1015 | 1015 | 1015 | 1015 | 1015 | 1015 | 1380 | 1380 |
Load volume (m3) | 8 | 9,5 | 10 | 11,5 | 13 | 15 | 15 | 17 | |
Roof load (kg) | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 |
The Fiat Ducato dimensions in individual interior fittings
The Ducato is the absolute space miracle on the vehicle market and therefore offers maximum space for individual interior fittings.
The interior of the Ducato is practically square. The base area is rectangular and is barely cut into by the vehicle contour from floor to ceiling. This is made possible by very straight outer walls and a vehicle roof without a slope. The vehicle has a very short front end, making the ratio of overall length to load compartment length the largest on the market.
The Ducato is available in four different lengths and three different heights. Height 2 is the ideal basis for an individual interior conversion, as it offers standing height and still allows a roof with a sufficient roof load for roof racks or pop-up roofs.
For a pop-up roof, the Ducato must be at least length 2. A Ducato with height 3 is delivered with a GRP high roof. A GRP high roof offers maximum height but does not allow any installations on the roof apart from roof hatches as a GRP roof releases zero kilos of roof load.
Would you like to compare different vehicles? Click here for the article on the Mercedes Sprinter or the Peugeot Boxer.


Mercedes Sprinter Vehicle dimensions
In this article we have summarized all Mercedes Sprinter dimensions for you. The basis for every interior design.
Introduction
To give you the smoothest possible start to your individual interior project, we have compiled the dimensions of all available Mercedes Sprinter models.
Disclaimer: VanMe is not responsible for the correctness and completeness of the content presented. All information without guarantee. After handing over the vehicle, we will professionally measure your interior with a laser so that we can take any deviations into account in the planning.
Mercedes Sprinter dimensions year of construction 2018 to date

Front-wheel drive | Rear-wheel drive & all-wheel drive | ||||||||||
L1H1 | L1H2 | L2H1 | L2H2 | L2H1 | L2H2 | L3H2 | L3H3 | L4H2 | L4H3 | ||
A | Wheelbase (mm) | 3259 | 3259 | 3924 | 3924 | 3665 | 3665 | 4325 | 4325 | 4325 | 4325 |
B | Total length (mm) | 5267 | 5267 | 5932 | 5932 | 5932 | 5932 | 6967 | 6967 | 7367 | 7367 |
C | Load compartment length (mm) | 2607 | 2607 | 3272 | 3272 | 3272 | 3272 | 4307 | 4307 | 4707 | 4707 |
D | Load compartment width (mm) | 1787 | 1787 | 1787 | 1787 | 1787 | 1787 | 1787 | 1787 | 1787 | 1787 |
E | Load compartment height (mm) | 1789 | 2079 | 1789 | 2079 | 1719 | 2009 | 2009 | 2243 | 2009 | 2243 |
F | Vehicle height (mm) | 2356 | 2642 | 2351 | 2621 | 2331 | 2835 | 2616 | 2831 | 2613 | 2825 |
G | Between wheel arches (mm) | 1412 | 1412 | 1412 | 1412 | 1350 | 1350 | 1350 | 1350 | 1350 | 1350 |
H | Length overhang (mm) | 996 | 996 | 996 | 996 | 1246 | 1246 | 1621 | 1621 | 2021 | 2021 |
Load volume (m3) | 7,8 | 8,8 | 9,5 | 11 | 9 | 10,5 | 14 | 15,5 | 15,5 | 17 | |
Roof load (kg) | 300 | 150 | 300 | 150 | 300 | 150 | 150 | 0 | 150 | 0 |
Mercedes Sprinter dimensions year of construction 2006 to 2018

L1H1 | L1H2 | L2H1 | L2H2 | L2H3 | L3H2 | L3H3 | L4H2 | L4H3 | ||
A | Wheelbase (mm) | 3250 | 3250 | 3665 | 3665 | 3665 | 4325 | 4325 | 4325 | 4325 |
C | Load compartment length (mm) | 2600 | 2600 | 3260 | 3260 | 3260 | 4300 | 4300 | 4700 | 4700 |
D | Load compartment width (mm) | 1780 | 1780 | 1780 | 1780 | 1780 | 1780 | 1780 | 1780 | 1780 |
E | Load compartment height (mm) | 1650 | 1940 | 1650 | 1940 | 2140 | 1940 | 2140 | 1940 | 2140 |
H | Length overhang (mm) | 990 | 990 | 1240 | 1240 | 1240 | 1620 | 1620 | 2020 | 2020 |
The Mercedes Sprinter dimensions in individual interior fittings
The Sprinter is the perfect basis for a tailor-made, individual interior design. It has a fairly high and uniform interior along its entire length.
All-wheel drive or rear-wheel drive does not change the dimensions of the interior. It is particularly pleasant that there is no step between the cockpit and the load compartment. This allows the living area and cockpit to merge into one another and function together in use. The front seats can therefore be ideally integrated into a dinette.
The Sprinter is available in four different lengths and three different heights. Height 2 is the ideal basis for an individual interior conversion, as it offers standing height and still allows a roof with a sufficient roof load for roof racks or pop-up roofs. A Sprinter with a height of 3 is delivered with a GRP high roof. A GRP high roof offers maximum height but does not allow any installations on the roof apart from roof hatches as a GRP roof releases zero kilos of roof load.
Would you like to compare different vehicles? Click here for the article for the Fiat Ducato or the Peugeot Boxer.